Abstract:
Oxymethylene ethers (OMEn, n=1-5) are a promising class of synthetic fuels that have the potential to be used as diesel additives or substitutes. A comprehensive understanding of their combustion properties is required for their safe and efficient utilization. In this study, a combined experimental and modeling work on oxidation of OME2 is reported: (i) Ignition delay time measurements of stoichiometric OME2 / synthetic air mixtures diluted 1:5 with nitrogen using the shock tube method at pressures of 1, 4, and 16 bar, and (ii) laminar flame speeds of OME2 / air mixtures using the cone angle method at pressures of 1, 3 and 6 bar. The experimental data obtained have been used for validation of three detailed reaction mechanisms of OME2. The results of ignition delay times showed that OME2 exhibits a two-stage ignition in the lower temperature region. The mechanism from Cai et al. (2020) best predicted the temperature and pressure dependence of ignition delay times. For laminar flame speeds, the experimental data were well matched by the mechanism from Ren et al. (2019) for all the conditions of pressures and equivalence ratios considered. From sensitivity analyses, it was observed that chain reactions involving small radicals, i.e., H, O, OH, HO2, and CH3 control the oxidation of OME2. The results obtained in this work will contribute to a better understanding of the combustion of oxymethylene ethers, and thus, to the design and optimization of burners and engines as well.